Optilink System Parts History

OPTILINK System History to January 2007

There have been a number of distinct system setups;

ORIGINAL SET UP

The original setup consisted of four separate units and was fibre compatible only;

ZE0118 – Keypad

ZE0120 – Interface module

ZE0119 – Receiver module

ZE0122 – Output module

SECOND SET UP

The second setup consisted of three units was fibre and wire compatible and was without sleep mode;

ZE0129 – Keypad MK2

ZE0133 – Interface module (fibre/wire)

ZE0130 – Output/Receiver module (fibre/wire)

THIRD SET UP

The third setup which consisted of three units was fibre and wire compatible only and was without sleep mode

ZE0129 – Keypad MK2

ZE0133 – Interface module (fibre/wire)

ZE0130i4 – Output/Receiver module (fibre/wire)

FOURTH SET UP

The fourth setup which consisted of three units was wire compatible only and is with sleep mode;

ZE0129 – Keypad MK2

ZE0148i1 – Interface module (wire only)

ZE0130i5 – Output/Receiver module (fibre/wire)

FIFTH SET UP

The last setup consisted of three units and was wire compatible only and is with sleep mode and momentary switching capability;

ZE0163 – Keypad MK3

ZE0167 – Interface module Mk4

ZE0169 – Output/Receiver module Mk4

LATEST SET UP

The latest setup consists of three units and is wire compatible only and is with sleep mode and momentary switching capability;

ZE0175 – Keypad MK4

(ZE0175i1 was without external 999 trigger. ZE0175i2 was with external 999 Trigger)

ZE0167 – Interface module Mk4

ZE0169 – Output/Receiver module Mk4

The current status of the parts is;

Keypads;

ZE0118  – OBSOLETE

replaced by;

ZE0129i2 – Keypad MK2 – SPARES ONLY

ZE0163i2 – Keypad MK3 – OBSOLETE (cannot replace ZE0129)

ZE0175i1 – Keypad MK4 used in CLKSYS4 (cannot replace ZE0129)

ZE0175i2 – Keypad MK4 used in CLKSYS4M1 (cannot replace ZE0129)

Interface Modules;

ZE0120 – OBSOLETE

replaced by;

ZE0133 – Interface module (fibre and wire compatible) – SPARES ONLY

ZE0148i2 – Interface module (wire compatible only) - SPARES ONLY

ZE0167i1 – Interface module Mk4 – New part (cannot replace ZE0148i1)

Output/Receiver Modules;

ZE0119 – Receiver module – OBSOLETE and

ZE0122 – Output module – OBSOLETE

replaced by single unit;

ZE0130 – Output/Receiver module – OBSOLETE

replaced by;

ZE0130i4 – Output/Receiver module – OBSOLETE

replaced by;

ZE0130i5 – Output/Receiver module – SPARES ONLY

ZE0169i2 – Output/Receiver module Mk4 – New part (can replace ZE0130i5 on wire systems only)